How hard is it to put a new floor in a regular bass boat? - putting floor boat>putting
Plywood Glue ... ... ... Screw fiberglass mat and resin .. some tools .... should be easy to
Sunday, December 6, 2009
Putting Floor Boat>putting How Hard Is It To Put A New Floor In A Regular Bass Boat?
3 comments:
Nix first saw the opportunity to remove the interior and exterior mirrors, with one piece fiberglass skin on the floor on a 1 / 2 will be replaced on the side all the way around the word, not depth, the thickness of the glass (about 1 / 8 inch) SCREWDRIVER now with a sheet of fiberglass shell of the old wood, you remove (the old layers of the soil should be easy) if you are any holes or notches first to throw a cardboard template, nothing, until you are completed, the rest is just a bunch of measuring and cutting
Sounds easy on paper.
Good luck and have fun.
This is no easy task. If you're a carpenter, well, complete with a workshop and what you do "Cost vs. thinking. Benefits. It is quite possible that you could buy a similar boat with his plate, much less than the place of their current boat.
This is no easy task. If you're a carpenter, well, complete with a workshop and what you do "Cost vs. thinking. Benefits. It is quite possible that you could buy a similar boat with his plate, much less than the place of their current boat.
Post a Comment